Utilizing Drill Bits For A Wall}

Submitted by: Jonathan Morleson

Many people think it is easier and cheaper to do their basic around the house fittings by hand instead of hiring a professional to do them. There is nothing wrong with this particular approach, but some care needs to be taken when you’re drilling holes into walls.

It’s not as simple as getting drill bits for a wall and simply making a hole within the plaster. You have to consider a number of different aspects.

The first is the location of the hole. If you can see the spot that the bricks meet, it is a good option to drill there. Drill bits for a wall manage the softer brickwork much better than the much denser brick. You will stand less potential for blunting your drill bit or causing harm to your drill.

In addition, you need to consider the depth of the hole. Don’t drill to deeply. Many walls incorporate electrical wiring and drilling might damage these if your drill bits for a wall go too deep and strike a cable.

You will want to make use of the right type of drill bits for a wall. In order to decide what type of drill bits for a wall you need, you need to know what kind of material you are likely to be drilling into. A drill bit that may handle plaster may not be equipped to handle concrete or masonry, while a drill bit which is too thick or too rough may cause a great deal of damage to the surrounding areas.

Just how much pressure must you put on the drill? You will need to put enough pressure on the drill to keep the drill bits for a wall in place, yet not to use all of your strength as that could break the drill bit or perhaps the drill itself.

Use the appropriate drill. The best drill is a hammer drill. Simply because a standard drill cuts into fibrous material while a hammer drill utilizes a mixture of two actions – hammering to break the aggregate material and also scooping out the bits that will break loose. That is why a standard drill works better for materials such as wood while a hammer drill works more effectively for man-made substances.

And the right kind of screws. The screws you employ need to be sufficiently strong to handle the weight that is going to be put on them or they will either break or pull free from their moorings.

In addition, you have to make sure to protect yourself correctly. The dust and dirt can easily get into your eyes and lungs, therefore you need to wear safety goggles and a dust mask to protect yourself from this. It’s also an extremely noisy operation and it’s also smart to wear ear plugs to protect your sensitive ear drums from the noise.

So, as you can see, using drill bits for a wall is not as easy as affixing the drill bit to any drill you have available and running riot with it. You need to be careful about where you drill and just how deep you decide to go and you have to protect yourself from the inevitable debris and noise.

About the Author: For more information about drill bits for wall surfaces visit the website

eurekadiy.ie

Source:

isnare.com

Permanent Link:

isnare.com/?aid=772009&ca=Home+Management}